General Description:
Raise, place, and unite iron or steel girders, columns, and other structural members to form
completed structures and/or structural frameworks. May erect metal warehouses and/or
assemble prefabricated metal buildings.
Essential Functions:
• Assemble hoisting equipment and rigging, such as cables, pulleys, and hooks, to move
heavy equipment and materials.
• Bolt aligned structural-steel members in position for permanent riveting, bolting, or
welding into place.
• Connect columns, beams, and girders with bolts, following blueprints and instructions
from supervisors.
• Drive drift pins through rivet holes in order to align rivet holes in structural-steel members
with corresponding holes in previously placed members.
• Erect metal and precast concrete components for structures.
• Fasten structural-steel members to hoist cables, using chains, cables, or rope.
• Force structural-steel members into final positions, using turnbuckles, crowbars, jacks,
and hand tools.
• Hoist steel beams, girders, and columns into place, using cranes, or signal hoisting
equipment operators to lift and position structural-steel members.
• Pull, push, or pry structural-steel members into approximate positions for bolting into
place.
• Ride on girders or other structural-steel members to position them, or use rope to guide
them into position.
• Unload and position prefabricated steel units for hoisting as needed.
• Verify vertical and horizontal alignment of structural-steel members, using plumb bobs,
laser equipment, transits, and/or levels.
• Catch hot rivets in buckets, and insert rivets in holes, using tongs.
• Cut, bend, and weld steel pieces, using metal shears, torches, and welding equipment.
• Dismantle structures and equipment.
• Fabricate metal parts such as steel frames, columns, beams, and girders, according to
blueprints or instructions from supervisors.
• Hold rivets while riveters use air-hammers to form heads on rivets.
• Insert sealing strips, wiring, insulating material, ladders, flanges, gauges, and valves,
depending on types of structures being assembled.
• Place blocks under reinforcing bars used to reinforce floors.
• Read specifications and blueprints to determine the locations, quantities, and sizes of
materials required.
• Duties may include light administration and assistance to Project Superintendent.
Competencies:
• Collaboration Skills
• Communication Proficiency
• Organizational and Problem-Solving Skills
• Time management – ability to prioritize tasks to meet deadlines
• Interpretation of Construction Drawings
• Ethical Conduct
• Ability to use math/complete calculations
Physical Demands:
Field/Jobsite Environment – Standing, sitting, climbing, crawling, standing, crouching, bending,
pushing/pulling, walking on uneven surfaces, and exposure to loud noises are to be expected
on a jobsite environment. This position is predominately outdoors at an Industrial Construction
Site. Exposure to extreme hot or cold outside temperatures is possible.
Position Type/Expected Work Hours:
This is a full-time, hourly position. Days and hours of work vary from each jobsite. Occasional
evening/weekend work or travel may be required as job duties demand.
Required Education and Experience:
• 3+ years of field experience as a Class-A Industrial Iron Worker / Structural Fitter
• Must hold NCCER Certification or willing to test (Ironworker and/or Rigger)
Industry Related Requirements:
• Must hold a valid TWIC Card
• Must hold a valid OSHA Basic Plus
• Must be able to pass all Safety Council related courses
• Must undergo Pre-Employment Screening (physical, drug & alcohol screen, audiogram,
fit test if applicable)
• Must hold a valid Driver’s License to operate company equipment and/or vehicles
The individual who occupies this position must not pose a direct threat or significant risk of
substantial harm to the health or safety of the individual or others that cannot be eliminated or
reduced by reasonable accommodation
Ironworker/Structural Fitter/Rigger will be responsible to have the following tools:
• Hard Hat • Soap Stone/Keel
• Safety Glasses • Center Punch
• Steel Toe Boots w/ defined heel • Torpedo Level
• Gloves • 2’ Level
• Tool Belt • Squares
• Bolt Bag • 2lb Hammer
• 25’ Tape Measure • Socket Set up to 1 ¼”
• 12’ Adjustable Wrench • Plumb Bob
• Spud Wrench – ¾” & 7/8” hard bolt • Screwdrivers
• Slever Bar • Snap Line Chalk Box
• Bull Pins
...Description SAIC is seeking a C++ User Interface Developer with expertise in implementing C++ user interfaces, Git, Linux containers and scripting to join our team in Sterling Heights, Michigan. This position is contingent upon contract award . Responsibilities...
...dock, rental dock and wet slips 2.Verify that dock crew is properly trained in all areas of responsibility a. Movement of customer boats during launch and retrieval including proper procedure of removing/installing covers and securing boats and personal watercraft to dock...
...About the Job: Apply only if you have prior experience as Medical Assistant, Dental Assistant or have certification in Dental Assistant. Apex Dental is looking for a dental assistant at Rock Hill, SC. Apply only if you have prior experience as Medical Assistant...
...market roles and ranging in areas like Field Sales, Key Accounts, Trade Marketing and Category Development. About the role The Shopper Marketing Manager is a key member of the EH Customer Marketing Team and will work across EHs Air Care and Household portfolio of...
Job Title: TutorJob Status: Part-timeProgram Information: School assignments may be located in schools in the Detroit, Public School... ...desired outcomes~Communicate effectively, both orally and in writing~Provide a high level of customer serviceEducational/...